Nortel Meridian SL-100 SE Replacement page 25

DTCI 0 Unit 1 PMReset Passed
15
DTCI 0 Unit 1 LoadPM Passed
16
17
18
19
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
If the PMRESET
passed
failed
Load the inactive unit by typing
>LOADPM UNIT
and pressing the Enter key.
where
unit number
is the number of the unit (0 or 1) to be loaded
Example of a MAP terminal response:
If the LOADPM
passed
failed
Determine why the load failed.
If the load failed and
the MAP terminal response is PM
Failed to Initialize
a card list is generated
the MAP terminal response is Load
File not in directory
Record the locations and PECs, including suffixes, of the cards
on the card list.
Perform the appropriate procedure in Card Replacement
Procedures then return to step 32 in this procedure.
Access the disk utility level by typing
>DISKUT
XPM card replacement procedures 25
in a DTCI shelf
Do
step 15
step 37
unit_no
Do
step 34
step 16
Do
step 32
step 17
step 19
NTAX78AA
(continued)