Application; Common Procedures; Action - Nortel Meridian SL-100 SE Replacement

Application

Use this procedure to replace an NT0X91 in the frame supervisory
panel (FSP) in the Meridian Cabinet Trunk Module-ISDN (MTCM-I), as
listed in the following table.
Procedure to replace NT0X91 cards in a FSP in the MTCM-I
PEC Suffixes
NT0X91 AA, AE
If you cannot identify the PEC, suffix, and shelf or frame for the card you
want to replace, refer to the Index for a list of cards, shelves, and frames
documented in this card replacement NTP.

Common procedures

Manually busying Series II PM and CPM C-side links is referenced in
this procedure.

Action

The following flowchart is only a summary of the procedure. To replace
the card, use the instructions in the step-action procedure that follows
the flowchart.
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
in Meridian Cabinet Trunk Module—ISDN
Card name
Alarm and control
card
FSP card replacement procedures 37
Shelf or cabinet name
FSP (NX26NA) in an MCTM-I
equipped with digital trunk
controller-ISDN (DTC-I) or line trunk
controller-ISDN (LTC-I) cards
NT0X91