Nortel Meridian SL-100 SE Replacement page 261

261 MCRM-S card replacement procedures
NTMX72
in an MCRM-S RCC2
At the MAP terminal
18
19
20
21
22
555-4031-547 Standard 12.02 July 2002
(continued)
After replacing the faulty card load the inactive RCC2 unit by
typing the following string:
>LOADPM UNIT
and pressing the Enter key.
where
unit_no
is the number of the inactive RCC2 unit (0 or 1).
Use the following information to determine where to proceed.
If load
passed
failed
Use the following information to determine where to proceed.
If you entered this proce-
dure from
alarm clearing procedures
other
Test the inactive unit by typing the following string:
> TST UNIT unit_no
and pressing the Enter key.
where
unit_no
is the number of the inactive RCC2 unit.
Use the following information to determine where to proceed.
If TST
passed
failed
unit_no
Do
Step 20
Step 28
Do
Step 27
Step 21
Do
Step 23
Step 28