Nortel Meridian SL-100 SE Replacement page 196

19
20
21
At the MAP terminal
22
23
24
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
MCRM-S card replacement procedures 196
Return the RMM to service by typing the following string:
>RTS
and pressing the Enter key.
Use the following information to determine where to proceed.
If RTS
passed
failed
Use the following information to determine where to proceed.
If referred or directed to
this procedure from
an alarm clearing procedure
other
Return all trunks in the RMM to service by typing the following
strings:
> trks;ttp;post tm rmm rmm_no
and pressing the Enter key.
> bsy all;rts all
and pressing the Enter key.
where
rmm_no
is the number of the RMM in which the card has been
replaced.
Use the following information to determine where to proceed.
If RTS
passed
failed
Observe the alarm that is produced and go to the appropriate
alarm clearing procedure in the Alarm Clearing Procedures.
in an MCRM-S RMM
Do
Step 21
Step 25
Do
Step 25
Step 22
Do
Step 27
Step 25
NT6X74
(continued)