23
24
25
26
27
28
29
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
MCRM-S card replacement procedures 272
Use the following information to determine where to proceed.
If RTS
passed
failed
Return to the alarm clearing procedure or other procedure you
were following that directed you to this procedure. If necessary,
go to the point where a faulty card list was produced, identify the
next faulty card on the list, and go to the appropriate card
replacement procedure for that card in this manual.
Obtain further assistance in replacing this card by contacting the
personnel responsible for a higher level of support.
Remove the sign from the active RCC2 unit.
Send any faulty cards for repair according to local procedure.
Record the following items in office records:
•
date the card was replaced
•
serial number of the card
•
symptoms that prompted replacement of the card
You have completed this procedure. Return to the maintenance
procedure that directed you to this card replacement procedure
and continue as directed.
in an MCRM-S RCC2
Do
Step 26
Step 25
NTMX73
(end)