Table of Contents
Advertisement
114 IPE card replacement procedures
System cards
in an IPE module
At the IPE shelf
5
6
7
8
555-4031-547 Standard 12.02 July 2002
(continued)
CAUTION
Static discharge may cause damage to circuit packs
Put on a wrist strap, and connect it to the
frame of the IPE before removing any cards.
This action protects the IPE against service
degradation caused by static electricity.
Put on a wrist strap.
Set the switch on the front of the power supply card to OFF
(down).
Locate the card to be removed on the appropriate shelf.
CAUTION
Equipment damage
Do not apply pressure to the components or
force cards into the slots.
Advertisement
Table of Contents
