Table of Contents
Advertisement
156 MCRM-S card replacement procedures
NT2X10
in an MCRM-S RMM
7
8
9
555-4031-547 Standard 12.02 July 2002
(continued)
CAUTION
Equipment damage
When inserting or removing a card, do not
apply direct pressure to the components or
force the cards into the slots.
Open the locking levers on the card to be replaced and gently
pull the card towards you until it clears the shelf.
Ensure that the replacement card has the same PEC, including
suffix, as the card you just removed.
Open the locking levers on the replacement card. Align the card
with the slots in the shelf and gently slide the card into the shelf.
Advertisement
Table of Contents
