Nortel Meridian SL-100 SE Replacement page 321

NTMX83
in an MCRM-S EXT or RCC2
Application
Use this procedure to replace the cards in the shelves or frames
identified in the following table.
Procedure to replace NTMX83 cards in a MCRM-S EXT or MCRM-S RCC2
PEC Suffixes
NTMX83 AA
Since it is a filler card, a procedure to replace the NTMX83 card in a
Meridian Cabinet Remote Module-Second series (MCRM-S) Extension
(EXT) shelf or Remote Cluster Controller 2 (RCC2) is not necessary.
See the following figure for NTMX83 card positions in either the
MCRM-S EXT shelf or RCC2 shelf.
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
MCRM-S card replacement procedures 321
Cardname
Filler Packet
Shelf/frame name
MCRM-S EXT or RCC2