Nortel Meridian SL-100 SE Replacement page 135

135 MCRM-S card replacement procedures
NT2X06
in an MCRM-S RMM
18
At the MAP terminal
19
> loadpm
20
21
22
555-4031-547 Standard 12.02 July 2002
(continued)
Press the RESET button while setting the circuit breaker to the
ON position. Both the converter FAIL LED and FRAME FAIL
lamps on the FSP illuminate.
Go to Step 20.
Reload the RMM by entering the following string:
and pressing the Enter key.
Use the following information to determine where to proceed.
If
message "loadfile not found in
directory" is received
load passes
load fails
Use the following information to determine where to proceed.
If you are using
Disk version1
Disk version 2
List the loadfile in the directory by entering the following string:
>DSKUT;LISTVOL D000volume_name all
or
>DSKUT;LISTVOL D010volume_name all
and pressing the Enter key.
where
volume_name
is the name of the disk volume_name
Local operating company policy determines on which disk, D000
or D010, the loadfile is to be placed.
Proceed to Step 19.
Do
Step 21
Step 25
Step 32
Do
Step 22
Step 23