Table of Contents
Advertisement
127 MCRM-S card replacement procedures
NT0X10
in an MCRM-S RMM
At the MAP terminal
14
15
16
17
18
19
20
21
555-4031-547 Standard 12.02 July 2002
(continued)
Test the RMM by typing the following string:
>TST
and pressing the Enter key.
Use the following information to determine where to proceed.
If TST passed
passed
failed
Return the RMM to service by typing the following string:
>RTS
and pressing the Enter key.
Use the following information to determine where to proceed.
If RTS
passed
failed
Send any faulty cards for repair according to local procedure.
Record the following items in office records:
•
date the card was replaced
•
serial number of the card
•
symptoms that prompted replacement of the card
Go to Step 22.
Return to the alarm clearing procedure or other procedure you
were following that directed you to this procedure. If necessary,
go to the point where a faulty card list was produced, identify the
next faulty card on the list, and go to the appropriate card
replacement procedure for that card in this manual.
Obtain further assistance in replacing this card by contacting the
personnel responsible for a higher level of support.
Do
Step 16
Step 20
Do
Step 18
Step 21
Advertisement
Table of Contents
