15
16
17
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
MCRM-S card replacement procedures 260
Using your fingers or thumbs, push on the upper and lower
edges of the faceplate to ensure that the card is fully seated in
the shelf.
Close the locking levers.
Power up the INACTIVE RCC2 unit as follows:
•
Ensure that the power converter (NTMX72) is inserted. A
major audible alarm may sound. This alarm is silenced when
power is restored to the converter.
•
Set power switch to the ON position. Set power switch to
RESET when setting the circuit breaker to the ON position.
in an MCRM-S RCC2
NTMX72
(continued)