Recording Card Replacement Activities; Explanatory And Context-Setting Information; Summary Flowchart; Step-Action Instructions - Nortel Meridian SL-100 SE Replacement

Commercial systems card replacement procedures
Table of Contents

Advertisement

118 MCRM-S card replacement procedures
For each card replacement task, you will find a procedure containing
the following details:

Recording card replacement activities

When a card is replaced, the following information should be noted in
office records:

Explanatory and context-setting information

In each procedure, the section titled "Application" identifies the card
PECs (including suffixes) and the shelves or frames to which this
procedure applies. Read this section before you perform the
step-action instructions. If the "Application" section does not identify the
card and shelf you are looking for, go to the "Index" where all card and
shelf combinations included in this book are listed.
The "Common procedures" section lists common procedures that you
may be asked to perform as you follow the step-action instructions. Go
to these common procedures only when directed to do so.

Summary flowchart

The flowchart is a summary of the main actions, decision points, and
possible paths you may take. Do not use the summary flowchart to
perform the procedure. Instead, use it to preview what you will be doing
and to prepare. For example, if you see that the instructions will involve
another office, you will know to advise that office before you begin the

step-action instructions.

Step-action instructions
The step-action instructions tell you how to change a card. Normally,
you perform the steps in order, but you may be directed to return to a
previous step and repeat a sequence. The successful completion of a
step in a sequence may depend on previous steps; therefore always
perform the steps in the order specified.
While following the step-action instructions, you may be sent to the
"Common card replacement procedures" chapter of this book or to
another Nortel Networks technical publication (NTP) to perform a set of
555-4031-547 Standard 12.02 July 2002
explanatory and context-setting information
summary flowchart
step-action instructions
the serial number of the replaced card
the date of replacement
the reason for the replacement

Advertisement

Table of Contents
loading

Table of Contents