Connecting The Xre200 To Power - Juniper XRE200 Hardware Manual

Figure 22: Attaching the Side-Rail Bracket to the XRE200 External Routing Engine
7. Have a second person secure the front of the external Routing Engine to the rack by using the
appropriate screws for your rack.
8. Slide the rear brackets into the side-rail brackets.
9. Attach the rear brackets to the rear post by using the appropriate screws for your rack. Tighten the
screws.
10. Ensure that the external Routing Engine chassis is level by verifying that all the screws on the front of
the rack are aligned with the screws at the back of the rack.

Connecting the XRE200 to Power

IN THIS SECTION
Powering On an XRE200 External Routing Engine | 77
Interconnecting XRE200 External Routing Engines | 78
Connecting AC Power to an XRE200 External Routing Engine | 79
Connecting DC Power to an XRE200 External Routing Engine | 80
76