Virtual Chassis Port Connector Pinout Information For Rj-45 Connections On An Xre200; External Routing Engine - Juniper XRE200 Hardware Manual

Table 27: RJ-45 Management Port Connector Pinout Information
Pin Signal
1 TRP1+
2 TRP1—
3 TRP2+
4 TRP3+
5 TRP3—
6 TRP2—
7 TRP4+
8 TRP4—
Virtual Chassis Port Connector Pinout Information for RJ-45 Connections
on an XRE200 External Routing Engine
A Virtual Chassis port (VCP) on an XRE200 External Routing Engine uses an RJ-45 connector to connect
to EX8200 member switches or to another external Routing Engine. The VCPs on an XRE200 External
Routing Engine include built-in port 0 (labeled 0) and ports 0 through 3 on each Virtual Chassis Control
Interface (VCCI) module.
The port uses an autosensing RJ-45 connector to support a 10/100/1000BASE-T connection.
Table 28 on page 64 provides the pinout information for the RJ-45 connector.
Table 28: Virtual Chassis Port Connector Pinout Information for an XRE200 External Routing Engine
Pin
1
2
3
4
Description
Transmit/receive data pair 1
Transmit/receive data pair 1
Transmit/receive data pair 2
Transmit/receive data pair 3
Transmit/receive data pair 3
Transmit/receive data pair 2
Transmit/receive data pair 4
Transmit/receive data pair 4
Signal
TRP1+
TRP1-
TRP2+
TRP3+
Description
Transmit/receive data pair 1
Transmit/receive data pair 1
Transmit/receive data pair 2
Transmit/receive data pair 3
64