Cables Connecting The Xre200 External Routing Engine To Management Devices - Juniper XRE200 Hardware Manual

Table 24: Cable Specifications for XRE200 External Routing Engine to XRE200 External Routing Engine
Connections
Port on XRE200
External Routing
Engine Cable Specification
Ethernet VCP Category 5 cable or equivalent
suitable for 1000BASE-T
operation
SFP VCP 1-gigabit SFP module connector
for 1000BASE-X Gigabit
Ethernet SFP module port
SEE ALSO
Configuring a Long-Distance Virtual Chassis Port Connection for an EX8200 Virtual Chassis
Cables Connecting the XRE200 External Routing Engine to Management
Devices
Table 25 on page 61 lists the specifications for cables that connect the XRE200 External Routing Engine
to a management device.
Table 25: Cable Specifications for Connections Between External Routing Engines and Management
Devices
Port on External
Routing Engine
Console (CON) port
(9600 baud)
Management (MGMT)
Ethernet port
(10/100/1000)
Cable Specification Cable/Wire Supplied
RS-232 (EIA-232) One 7-foot (2.13-meter)
serial cable length with RJ-45/DB-9
connectors
Category 5 cable or One 7-foot (2.13-meter)
equivalent suitable for length with RJ-45
1000Base-T operation connectors
Cable/Wire Maximum
Supplied Length
Two 7-foot 328 feet
(2.13-meter) length (100 meters)
with RJ-45
connectors
None 43.5 miles
(70 km)
Maximum
Length
6 feet
(1.83 meters)
328 feet
(100 meters)
61
Receptacle
RJ-45
autosensing
SFP port
External
Routing Engine
Receptacle
RJ-45
RJ-45
autosensing