Juniper XRE200 Hardware Manual page 66

You can also extend external Routing Engine-to-EX8200 switch connections using the SFP ports on the
1000BASE-X VCCI modules with the use of an intermediary switch. An intermediary switch is required
because the MGMT port on the internal Routing Engine of an EX8200 switch does not support SFP
connections. See Understanding Long-Distance Virtual Chassis Port Configuration for an EX8200 Virtual
Chassis.
Power requirements—You must plan the installation site to meet the power requirements of the EX8200
switches and external Routing Engines in the EX8200 Virtual Chassis. See
XRE200 External Routing Engines" on page 37
Specifications for an XRE200 External Routing Engine" on page 40
See Calculating Power Requirements for an EX8208 Switch or Calculating Power Requirements for an EX8216
Switch for information on EX8200 switch power requirements.
RELATED DOCUMENTATION
Understanding EX8200 Virtual Chassis Components
Understanding EX8200 Virtual Chassis Hardware Configurations
for AC power supply information or
for DC power supply information.
"AC Power Specifications for
"DC Power
66