Returning an XRE200 Chassis or Components
IN THIS SECTION
Returning an XRE200 External Routing Engine for Repair or Replacement | 121
Locating the Serial Number on an XRE200 External Routing Engine or Component | 122
Contact Customer Support to Obtain Return Material Authorization | 128
Packing an XRE200 External Routing Engine or Component for Shipping | 129
Returning an XRE200 External Routing Engine for Repair or Replacement
If you need to return an XRE200 External Routing Engine or hardware component to Juniper Networks
for repair or replacement, follow this procedure:
1. Determine the serial number of the external Routing Engine or component. For instructions, see
"Locating the Serial Number on an XRE200 External Routing Engine or Component" on page
2. Obtain an RMA number from JTAC as described in
Material Authorization" on page
NOTE:
Do not return any device component to Juniper Networks unless you have first
obtained an RMA number. Juniper Networks reserves the right to refuse shipments that do
not have an RMA. Refused shipments are returned to the customer through collect freight.
3. Pack the external Routing Engine or component for shipping as described in
External Routing Engine or Component for Shipping" on page
For more information about return and repair policies, see the customer support page at
https://www.juniper.net/support/guidelines.html.
"Contact Customer Support to Obtain Return
128.
"Packing an XRE200
129.
121
122.