Hard Disk Drive (Hdd) Module In An Xre200 External Routing Engine - Juniper XRE200 Hardware Manual

External routing engine
Hide thumbs Also See for XRE200:
Table of Contents

Advertisement

of types of VCCI modules. You can install an RJ-45 VCCI module in one VCCI module slot and an SFP
VCCI module in the other VCCI module slot, for instance.
We recommend configuring all EX8200 Virtual Chassis with a redundant XRE200 External Routing Engine.
You must use two VCCI modules if your EX8200 Virtual Chassis has five or more member switches and
a redundant XRE200 External Routing Engine. You do not need to purchase a second VCCI module if your
EX8200 Virtual Chassis has four or less member switches.
VCCI modules are field-replaceable units (FRUs).
SEE ALSO
Installing a VCCI Module in an XRE200 External Routing Engine | 101

Hard Disk Drive (HDD) Module in an XRE200 External Routing Engine

The hard disk drive (HDD) module in an XRE200 External Routing Engine is a 160 GB module. The XRE200
External Routing Engine is shipped with two HDD modules, one in each HDD module slot on the front
panel of the external Routing Engine. See
Figure 16: Hard Disk Drive Module
Hard disk
Hard disk
Activity LED
Failure LED
HDD modules are hot-removable and hot-insertable field-replaceable units (FRUs).
SEE ALSO
Installing an HDD Module in an XRE200 External Routing Engine | 103
Figure 16 on page
43.
43

Advertisement

Table of Contents
loading

Table of Contents