Juniper XRE200 Hardware Manual page 48

Table 18: Site Preparation Checklist (continued)
Item or Task
Verify that your rack or cabinet meets the
minimum requirements for the installation
of the external Routing Engine.
Plan rack or cabinet location, including
required space clearances.
Secure the rack or cabinet to the floor and
building structure.
Cables
Acquire cables and connectors:
Determine the number of cables needed
based on your planned configuration.
Review the maximum distance allowed
for each cable. Choose the length of cable
based on the distance between the
hardware components being connected.
Plan the cable routing and management.
RELATED DOCUMENTATION
General Safety Guidelines and Warnings | 133
General Site Guidelines | 54
Installing and Connecting an XRE200 External Routing Engine | 70
For More Information
"Rack Requirements" on page 55
"Cabinet Requirements" on
page 57
"Cables Connecting the XRE200
External Routing Engine to
XRE200 External Routing Engines
and EX8200 Switches" on
page 60"Cables Connecting the
XRE200 External Routing Engine
to XRE200 External Routing
Engines and EX8200 Switches" on
page 60
Performed By Date
48