Table of Contents
Advertisement
Figure 2: XRE200 External Routing Engine
Table 4 on page 22
summarizes the physical specifications of the XRE200 External Routing Engine.
Table 4: Physical Specifications of the XRE200 External Routing Engine
Description
Height
Chassis width
Chassis depth
Weight
You can mount an XRE200 External Routing Engine on 2 rack units (2 U) of a standard 19-in. rack. An
XRE200 External Routine Engine supports two-post and four-post rack mounting. A four-post rack mount
kit is shipped with all XRE200 External Routing Engines.
SEE ALSO
Installing and Connecting an XRE200 External Routing Engine | 70
Field-Replaceable Units for an XRE200 External Routing Engine
Field-replaceable units (FRUs) are external Routing Engine components that you can replace at your site.
The external Routing Engine uses these types of FRUs:
Hot-insertable and hot-removable—You can remove and replace these components without powering
off the external Routing Engine or disrupting the external Routing Engine function.
Offline field-replaceable—You can replace these components, but the external Routing Engine must be
powered off to replace the component.
Value
3.5 in. (8.9 cm)
17.26 in. (43.8 cm)
17.72 in. (45 cm)
Dual power supply configuration (shipping configuration): 27 lb (12.2 kg)
22
Advertisement
Table of Contents
