Shelf - EAW UMX.96 Owner's Manual

EAW UMX.96 Owner's Manual
9.5.1.6

SHELF

These buttons are available for the LOW and HI EQ bands. When engaged, the EQ becomes a shelving filter
rather than a parametric filter. The Q control becomes inactive when SHELF is engaged.
The following table summarizes the equalizer's features.
Equalizer Control Summary
Control/Button
All knobs
Ctrl+
Shift+
HPF
White button
Knob
V-Pot button
LPF
White button
Knob
V-Pot button
Gain knob
LEDs
Bottom LED
Freq
Low/Band 1
Traditional
Full Range
Low Mid/Band 2
Traditional
Full Range
High Mid/Band 3
Traditional
Full Range
High/Band 4
Traditional
Full Range
Q
Shelf Buttons
Equalizer IN
Details
Sets the default value for that parameter
Fine parameter adjustment
High-pass filter
In/Out for filter
Filter frequency: 20 Hz-400 Hz (Default: 80 Hz)
Cycles through filter slopes: 6, 12, 18, 24 dB/octave.
The display indicates slope setting, then reverts.
Low-pass filter
In/Out for filter
Filter frequency: 400 Hz-20 kHz (Default: 20 kHz)
Cycles through filter slopes: 6, 12, 18, 24 dB/octave.
The display indicates slope setting, then reverts.
Varies the gain for that band: ±15 dB (Default: 0 dB)
Gain value
Lit when gain = 0 dB
Varies the center frequency for that band
Default: 80 Hz
20 Hz-400 Hz
20 Hz-20 kHz
Default: 500 Hz
100 Hz-2 kHz
20 Hz-20 kHz
Default: 2 kHz
400 Hz-8 kHz
20 Hz-20 kHz
Default: 10 kHz
1 kHz-20 kHz
20 Hz-20 kHz
Varies the Q from 0.1 to 64 (Default: 2)
Changes that band from parametric to shelf mode (Bands 1 and 4 only)
This white button toggles the EQ in or out
9-8
The Selected Channel