Table of Contents
Advertisement
EAW UMX.96 Owner's Manual
12.7
Effects Button
The Effects navigation button at the bottom of the screen gives you immediate access to the four internal
effects processors. Each processor can be set to one of seven different processors using the corresponding
Effect Selection buttons. All of them are mono-in, stereo-out processors.
Reverb
Reverb + Gate
Chorus
Mono Delay
Stereo Delay
Ping Pong
Flanger
Pressing an EDIT EFX button selects the corresponding effects return and takes you directly to that proces-
sor's controls on the Channel>Effects screen. Return to the effects screen by pressing the Effects navigation
button at the bottom of the screen. Refer to Section 12.2.11 for additional information about each effect.
Stereo reverb.
Stereo reverb followed by a gate.
Chorus produced by modulating the delay time of a delay line.
Mono delay with feedback.
Mono-in, stereo-out delay with feedback. No cross-coupling.
Mono-in, stereo-out delay with cross-coupled feedback.
Flanger produced by modulating the delay time of delay line at a subsonic rate.
12-65
Touchscreen Interface
Advertisement
Table of Contents
