Table of Contents
Advertisement
EAW UMX.96 Owner's Manual
12.8.1.1
Input Routing Tab Edit Menu
The input routing Edit button has the following commands:
NYI
• Save Input Routing Preset As — Saves the current routing assignments as a preset under a user-defined name.
• Load Input Routing Preset — Loads a previously saved routing assignment preset. The console ships with
a variety of common input routing presets.
• Reset Input Routing — Restores the routing screen to its default configuration (hardware input 1 con-
nects to mixer input 1, hardware input 2 connects to mixer input 2, etc.).
12.8.2
Output Routing Tab
NYI
The output routing tab displays a 24 by 24 routing matrix with the hardware outputs shown along the top
and the console's output channels shown along the left side using custom names if present. Touch an inter-
section to create a connection from a mixer output channel to a hardware output. Mixer output channels
can be routed to multiple hardware outputs.
The console output channels are grouped into the following 24 channel groups:
• Aux/Groups 1-24
• Internal FX Sends 1-4
• Main Outputs 1-12, Left, Right, Center, Monitor Left, Monitor Right, Monitor Center
• Matrix 1-8, Talkback Out
You can change between these groups using a drop-down list or the arrow keys to cycle through the banks.
The hardware outputs are grouped into the following 24 channel groups:
•
Aux/Groups 1-24
•
Main Outputs 1-12, Monitor Left, Monitor Right, Monitor Center
•
Matrix 1-8
Change between these groups using the drop-down list or the arrows to cycle through the banks. The con-
sole output channels are normally connected to their corresponding hardware output.
12-68
Touchscreen Interface
Advertisement
Table of Contents
