File Transfer - EAW UMX.96 Owner's Manual

EAW UMX.96 Owner's Manual
12.12.3

File Transfer

NYI
The Transfer tab allows the management and transfer of Console Configurations, Shows, Individual Snap-
shots, and/or Presets between the host computer, and a USB Mass Storage Device such as a thumb drive.
The management tab contains two identical file browsers with a row of vertical buttons in-between.
• Like the Save and Load tab browser (described in a previous sections), the top of the browsers display a
drop-down menu for choosing the drive used to save the data (Local, USB1, USB2, etc.). The list displays
folders and files with special icons (folders, shows, configurations, presets).
• Only one item in the list can be selected at a time and will be outlined in yellow.
• Navigate through the file structure using the Up Arrow and the OPEN buttons (blue).
• Create new folders with the New Folder button (blue).
• Unlike the other browsers, a check box follows each displayed item. These can be checked or unchecked
allowing for multiple selections for transfer.
• The ALL and NONE buttons allow quick selection of all or none of the check boxes.
Below each browser are three buttons: Rename, Duplicate, Delete. These operate on the currently selected
item and not the checked items.
• When pressed, the rename button uses the onscreen keyboard to rename the currently selected item. The
current name is highlighted; simply begin typing to replace the existing name.
• The duplicate button makes a copy of the currently selected item. It automatically presents the onscreen
keyboard. You can not rename the duplicate with the exact same name as the original.
• The delete button deletes the currently selected item. This is a permanent deletion (no undo) so a confir-
mation dialog helps prevent accidents.
12-100
Touchscreen Interface