Table of Contents
Advertisement
EAW UMX.96 Owner's Manual
• Mix Assign buttons — These buttons assign the channel to the L/R and CENTER channels depending on
LR/C or LCR mode of the console. See Section 12.10.1.1.
• Aux/Groups — This is the overview screen for the channel's Aux/Group sends. Touching this part of the
overview screen displays the Aux/Groups control screen. This is the same screen that the Aux/Groups tab
accesses. See Section 12.2.8.
• Equalizer — The internal effects channels have a 3-band equalizer with low and high swept shelving
bands (20 Hz-2 kHz and 200 Hz-20 kHz) and a full-range, full parametric band (20 Hz-20 kHz). The equal-
izer displays its frequency response curve on its display. Touching the equalizer block on the Overview
screen displays the equalizer screen.
12.2.16.1 Internal FX Edit Menu
The FX channel Edit Menu has the following commands:
NYI
• Save Channel Preset As — Saves the channel's settings as a preset using a user-defined name.
• Load Channel Preset — Loads a previously saved channel preset.
• Reset channel — Resets the channel to its default settings.
• Reset EQ — Resets the channel EQ to its default settings.
• Reset aux/groups — Resets the aux/groups section to its default settings.
• Copy — Copies the channel's settings to the clipboard.
• Paste — Pastes the effects settings from the clipboard.
12.2.17 Internal FX Effects Tab
The internal effects consist of four independent Mono Input / Stereo Output effects processors. Each proces-
sor can utilize one of the following algorithms: Reverb, Reverb through Gate, Mono Delay, Stereo Delay, Ping
Pong Delay, Chorus, or Flange.
All time-based effects are adjustable via a tap tempo function by simply tapping the tap button on the
NYI
touchscreen.
12-26
Touchscreen Interface
Advertisement
Table of Contents
