Utility Connections - EAW UMX.96 Owner's Manual

EAW UMX.96 Owner's Manual
Matrix Outputs — The Matrix outputs are line level, balanced outputs via XLR male connectors. See Section
12.4 for more info.
7
Monitor Outputs — The monitor outputs allow true LR+Center/Mono monitoring following the solo bus.
All three are line level, balanced outputs via XLR male connectors. See Section 12.9.2 for more info.
4.2.4

Utility Connections

Talkback Mic Input — 48v phantom powered balanced XLR female connector for the talkback section of
the console. Phantom power is always present here.
External Talkback Input — This XLR line level input provides a pass thru option for communication be-
tween two consoles. When the UMX.96 is used as a stage monitor console, this input lets the FOH console
access the monitor rig for talkback
Talkback Output — The talkback output is a line level, balanced output provided via an XLR male connec-
tor that sends the signal from the talkback mic out of the console when the Push to Talk button is pressed.
Typically this is used to communicate with the other console in a dual-console application (FOH and moni-
tors). See Section 12.9.1 for more info..
Smaart Mic Input — Connect the RTA-420 microphone (included with your UMX.96) to this input. It pro-
vides 48V phantom power for the microphone, which is calibrated to work with the Smaart software and the
UMX.96 SPL display. See section 12.6 for more info.
Talkback
PUSH
Mic
Matrix Outputs
6 5
Monitor Outputs
Left Right
Utility
External
PUSH
+ 48V
In
4 3
Center/Mono
Talkback
Out
4-5
Connections
2
Measurement
PUSH
+ 48V
Mic