EAW UMX.96 Owner's Manual
12.2.9
Analog Input Inserts Tab
NYI
This tab allows control of the pre-DSP and post-DSP digital inserts. A drop-down list allows selection of the
insert from the available choices. The list is separated into software DSP inserts and hardware inserts. The IN
buttons allow enabling the inserts and for software DSP inserts, the Edit buttons allow quick access to the
DSP processor control screen. Inserts are configured in the Routing > Insert Routing screen. See Section
12.8.4 for details.
12.2.9.1
Inserts Edit Menu
The Inserts tab edit menu has the following commands:
NYI
• Reset Inserts — Resets all inserts to their default setting
• Copy — Copies insert assignments to the clipboard
• Paste — Pastes insert assignments from the clipboard
12-20
Touchscreen Interface