Bank Assign Tab; Bank Assign Edit Menu - EAW UMX.96 Owner's Manual

EAW UMX.96 Owner's Manual
12.9.7

Bank Assign Tab

The Banks tab gives an overview of which master banks and channel banks are currently assigned and al-
lows you to directly assign them. You can also control master bank locking from this screen.
The screen shows the 6 channel buckets as on-screen icons with one selected in yellow. To the right are sets
of buttons for each bank (upper and lower) showing the currently assigned channel bank.
Any currently assigned master banks show up in its correct physical orientation. Sections without master
banks assigned appear empty and display the channel bank underneath.
Use the vertical stack of master bank buttons on the left to assign a master bank to the selected bucket.
Unassign a section by selecting the bucket and pressing the NONE button.
One other button, LOCK, controls the operation of the master banks. When LOCK is enabled (default), mas-
ter banks remain visible on the control surface even when changing channel banks. They must be manually
removed from the control surface or from this screen to return the channel bank underneath. When LOCK is
disabled, master banks remain only until a channel bank button is pressed, resetting all three buckets in that
bank (upper or lower).
12.9.7.1

Bank Assign Edit Menu

The Bank Assignment Tab's Edit Menu has the following commands:
NYI
• Save Master Bank Preset As — Saves the current Master Bank configuration as a preset using a user-de-
fined name.
• Load Master Bank Preset — Loads a previously saved Master Bank configuration.
• Reset All Master Banks — Resets all Master Bank assignments to NONE.
12-82
Touchscreen Interface