Monitor - EAW UMX.96 Owner's Manual

EAW UMX.96 Owner's Manual
12.9.2

Monitor

This is the engineer's monitor section of the console where the engineer controls what they hear through
the monitor and phones outputs. The following controls are available:
• Monitor Delay — Sets the 0-700 ms delay for the monitor speakers and headphones to allow time align-
ment with audio arriving acoustically from the main FOH speakers. Like other delay screens, this control
displays in both time and distance units and is adjustable in 0.5 ms (6.6-inches) steps.
• Solo Level — A knob and readout matching the setting of the control located on the control surface. This
control adjusts the level of any source that has been soloed. It has a range of –15 dB to +15 dB.
• AFL/PFL — These two radio buttons duplicate the functionality of the PFL button located on the control
surface. The AFL button selects After-Fader Listen; the signal source for any soloed channel is after the fader
and pan control. The PFL button selects Pre-Fader Listen; the signal source for any soloed channel is before
the fader and before the channel mute switch. See "Solo Routing" (Section 5.2.1) for more information.
12-74
Touchscreen Interface