Table of Contents
Advertisement
EAW UMX.96 Owner's Manual
12.9.5
User Banks Tab
The user fader banks let you create two banks of 24 faders representing signals from anywhere in the con-
sole (inputs, outputs, auxes, groups, VCAs, FX returns, internal FX returns, expansion chassis, stereo channels
and the matrix). Use the user banks to create two customized fader banks that let you quickly and directly
access these disparate channels when needed. Once you have created your user bank(s), you access them
via the two User Banks buttons in the Channel Bank Select section on the control surface.
A single screen sets up the user banks. The screen contains groups of sources displayed in two columns:
Source Bank and User Bank. The left column displays a set of buttons to choose which 24 channels from the
list below to show:
• Analog 1-24
• Analog 25-48
• Expansion 49-72
• Expansion 73-96
• Stereo 1-8
• Stereo IFX Returns 1-4
• Aux/Groups 1-24
• VCA 1-16
• Main LRC
• Matrix 1-8
Select a group and then from the list, choose a source channel to add to a user bank via the touch screen.
The right column shows the 24 channel positions on the user bank. Above this list is a group of buttons. The
top two buttons select either user bank 1 or 2 for configuration.
The row of buttons below the bank 1 / bank 2 selectors manipulates the assignment of channels into the
user bank. Select the channel position that you want the channel on the left to occupy via the touch screen.
Touch the replace button to replace whatever the User Bank Selection with the channel selected in the
Source Bank.
12-78
Touchscreen Interface
Advertisement
Table of Contents
