System Processor Output Eq; System Processor Output Delay; Polarity Invert; Output Level - EAW UMX.96 Owner's Manual

Hide thumbs Also See for UMX.96:
Table of Contents

Advertisement

EAW UMX.96 Owner's Manual

12.5.1.13 System Processor Output EQ

Each of the 12 output legs has one of these equalizers. Functionally, they are identical to the equalizer found
in the input processor. Refer to Section 12.5.1.3 except that the high-pass and low-pass filters of the cross-
over filters are also displayed here (in both Standard and Advanced Routing Views). This is done to allow the
EQ to be adjusted with the corresponding X-Over in view.

12.5.1.14 System Processor Output Delay

This works the same as the System Processor Input Delay. Refer to Section 12.5.1.6 for details.

12.5.1.15 Polarity Invert

The INV button inverts the polarity of that leg of the processor by 180-degrees when enabled.

12.5.1.16 Output Level

This displays the output level of that leg of the processor in dB. You can adjust the output
level in 0.1 dB increments between ±12 dB via Touch and Spin.
12-60
Touchscreen Interface

Advertisement

Table of Contents
loading

Table of Contents