Capacitor Discharge Ignition (Cdi) - Yamaha MM700A Manual

148
New Battery Installation
When replacing the old battery with a new one, make
sure to charge it completely (specific gravity,
1.260- 1.280) before installing it. Failing to do so, or using
the battery with a low electrolyte level will permanently
damage the battery.
NOTE
When purchasing a new battery from a deal-
usually services the battery by adding elec-

CAPACITOR DISCHARGE IGNITION (CDI)

Nut
1.
2. Lockwasher
3. Bolt
4. Starter
5. Spacer
6. Flywheel
7. Bolt
Washer
8.
9. Stator
10. Key
11. Crankshaft
12. Screw
13. Plate
14. Screw
15. Bracket
16. Pickup coil
pulley
tery, make sure it has been properly
charged.
CAPACITOR DISCHARGE IGNITION (CDI)
All models use a capacitor discharge ignition system
(Figure 6). This section describes removal and installa-
coils and lighting coil.
CHAPTER SIX