Using The Remote Ui; Starting The Remote Ui - Canon imageCLASS MF4690 Reference Manual

Before Using the
Machine 1

Using the Remote UI

Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
The Remote UI software enables you to access and manage the
machine connected to a network using a web browser.
Check the machine status from a network computer
●
Set and control the machine from a computer
●

Starting the Remote UI

■
Before you start the Remote UI, select <VIEW IP ADDRESS> in <NETWORK
SETTINGS> located in the <SYSTEM SETTINGS>, and verify the IP address of
the machine. If you do not know the IP address, consult with your network
administrator. (See "Checking Network Settings, " on p. 6-43.)
1.
Start the web browser.
2.
Enter the IP address of the machine in [Address]
or [Location] → press [Enter] on the keyboard.
The Remote UI screen appears.
Back Previous
3.
Enter the ID and password.
– For No Management mode: Select [Administrator Mode] or [End-
User Mode] → enter the password or owner name.
– For Department ID Management mode: Enter the department ID
and password.
– For User Management mode: Enter the User ID and password.
For details on the ID and password, see "Managing the Department/
User ID, " on p. 7-21.
TOP
Next
7-4