Canon imageCLASS MF4690 Reference Manual page 344

Before Using the
Machine 1
ADJUST./CLEANING
Document and Paper
5. SPECIAL MODE W
2
Copying
3
Sending and
Receiving 4
6. SPECIAL MODE X
Printing and
Scanning
5
Network
7. SPECIAL MODE Y
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
OFF
MODE1
MODE2
Sets whether to prevent blur from appearing on the printouts for PDL (PCL/BDL) jobs.
Selects in normal conditions.
Sets the density of printouts becomes two-levels lighter than normal condition.
Sets the density of printouts becomes four-levels lighter than normal condition.
Sets whether to prevent blur from appearing on the printouts for print jobs from PCL driver.
When this setting is set to <ON>, the density of printouts may become light.
– ON
– OFF
Sets to enhance the fixing characteristics of toner under the conditions of a low temperature
environment.
When this setting is set to <ON>, first copy time and the time to resume from the sleep mode
may take longer.
– OFF
– ON
Back Previous Next
TOP
11-31