Configuring A Shared Folder - Canon imageCLASS MF4690 Reference Manual

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
13.
Press [Stop/Reset] to return to the standby
mode.
14.
Restart the machine.

Configuring a Shared Folder

■
To send data from the machine to a computer on your network, you
need to specify the settings of the computer for receiving data. You
can send data over a NetBIOS network to a Windows shared folder.
The following procedures describe a sample shared folder configuration.
Depending on your environment, the actual configuration procedure may
differ.
Windows 98/Me
– If a suitable Windows 2000/XP/Server 2003/Vista machine is available on
your network, it is recommended that you configure that machine as a
file server instead of using a Windows 98/Me machine.
– In the following procedures, items displayed on the screen for Windows
98 are used; items might differ depending on your operating system.
Back Previous
1.
Specify the NetBIOS settings.
– Right-click the [Network Neighborhood] icon displayed on the
desktop → click [Properties].
– In [The following network components are installed], confirm
that both [Client for Microsoft Networks] and [File and printer
sharing for Microsoft Networks] appear. If these components do
not appear, click [Add] to install.
TOP
Next
6-23