Canon imageCLASS MF4690 Reference Manual page 271

Before Using the
Machine 1
CANNOT SEND
Document and Paper
CHECK SETTINGS
2
Description
Copying
3
Action
Sending and Description
Receiving 4
Printing and
Action
Scanning
5
Description
Network
6
Action
Remote UI
7
System Manager
Settings
8
CHANGE PAPERSIZE
Maintenance
Description
9
Action
Troubleshooting
10
Appendix
11
Table of Contents
Index
You have specified the group dialing when the
line is off the hook.
Specify the recipient other than group dialing.
You have specified the one-touch key or coded
dial code that has registered with other than fax
number when the line is off the hook.
Make sure that the line is disconnected.
The registered group is already nested for three
levels of subgroups (e.g., a group registered in a
group in a group in a group).
You cannot register a group to contain more
than three levels of subgroups. Modify the group
so that it contains three levels of groups or less.
The paper size is not appropriate for a two-sided
copy.
Set the paper size to <LTR> or <A4>, then load
paper of the same size.
Back
CHANGE REG'D SIZE
→ PAPER SETTINGS
Description The paper size is not appropriate for printing a
report or list.
Action Set the paper size to <LTR>, <LGL>, <A4>,
<OFICIO>, <BRAZIL- OFICIO>, <MEXICO-OFICIO>,
<FOLIO> or <FLSP>, and then load paper of the
same size.
Description The paper ran out while printing a received
document, report or list.
Action Load paper in the paper cassette.
Description The size of the paper in the paper cassette or
multipurpose tray is different from that of the
paper specified in <CASSETTE> or <MP TRAY> of
the <PAPER SETTINGS> menu.
Action Change the paper size in <CASSETTE> or <MP
TRAY> of the <PAPER SETTINGS> menu. For
more information, see "If <LOAD CORRECT
PAPER> is displayed," on p. 10-29.
TOP
Previous Next
10-14