Canon imageCLASS MF4690 Reference Manual page 328

Before Using the
Machine 1
TX/RX SETTINGS
Document and Paper
2
Copying
3
2. FAX SETTINGS
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
RX TO MEMORY
KEEP PRINTING
1. RX MODE
2. USER SETTINGS
1. UNIT TELEPHONE #
2. TEL LINE TYPE
3. OFFHOOK ALARM
3. TX SETTINGS
The machine stores all documents in memory.
The machine does not store documents in memory if the toner runs out. Reset to <RX TO
MEMORY> after replacing the toner cartridge.
Sets the fax features.
Selects the receive mode. (See "Set the Machine for Receiving Faxes," in the Starter Guide.)
– FaxOnly
– FaxTel
– AnsMode
– DRPD
– Manual
Specifies the basic operation settings in the fax mode.
Registers your fax number (max. 20 characters, including spaces). (See "Set the Machine for
Sending Faxes," in the Starter Guide.)
Selects the telephone line type. (See "Set the Machine for Sending Faxes," in the Starter Guide.)
– TOUCH TONE
– ROTARY PULSE
Sets whether the alarm sounds when the handset of the external telephone is off the hook.
– ON
– OFF
Sets the transmission features.
Back Previous Next
TOP
11-15