Canon imageCLASS MF4690 Reference Manual page 357

Before Using the
Machine 1
SYSTEM SETTINGS
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
1. MAX TX DATA SIZE
2. DIVIDED OVER MAX
2. FAX SETTINGS
1. TX START SPEED
2. RX START SPEED
3. MEMORY LOCK
OFF
ON
1. PASSWORD
2. REPORT PRINT
Sets the maximum data size for outgoing e-mail messages. If the e-mail message exceeds this
data size limit, it is split up into several e-mail messages before being sent (0MB-99MB).
Sets whether to divide a document into separate files when it is sent if its size exceeds the data
size you specify.
– OFF
– ON
Sets the facsimile communication.
Sets the transmission start speed for faxes. (33600bps, 2400bps, 4800bps, 7200bps, 9600bps,
14400bps)
Sets the reception start speed for faxes. (33600bps, 2400bps, 4800bps, 7200bps, 9600bps,
14400bps)
Sets whether to receive and store all documents in memory and not to print automatically. (See
"Memory Lock Reception," on p. 4-38.)
Disables memory lock reception.
Enables memory lock reception.
Registers the password that protects the authority for accessing to memory.
Sets whether to print a report on memory lock reception.
– OFF
– ON
Back Previous Next
TOP
11-44