Canon imageCLASS MF4690 Reference Manual page 116

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
4.
Specify the destination, then press [OK].
The machine starts to send the selected document.
– You can specify only one destination registered in a one-touch
key or coded dial code.
– The document is erased from memory if transferring is
successful.
Printing or Erasing Documents with Forwarding
Errors
1.
Press [System Monitor] repeatedly to select
<FORWARD ERR. STATUS>, then press [OK].
2.
Press [ ] or [ ] to select the desired
document, then press [OK].
3.
Press [ ] or [ ] to select <PRINT> or
<CANCEL>, then press [OK].
If <MEMORY LOCK> is <ON> in <COMMUNICATIONS> in <SYSTEM
SETTINGS>, the documents cannot be printed.
Back Previous
4.
Press [ ] to select <YES>.
If you do not want to print or erase the job, press [
<NO>.
5.
Press [Stop/Reset] to return to the standby
mode.
Remote Reception
■
Remote reception enables you to use an external telephone
connected to the machine to receive faxes manually. This can be
useful when the machine is not nearby or is being used by someone
else.
Registering Remote Reception ID
Follow this procedure if you want to change the default remote
reception ID of 25.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <TX/RX SETTINGS>,
then press [OK].
TOP
Next
] to select
4-42