Canon imageCLASS MF4690 Reference Manual page 272

Before Using the
Machine 1
CHECK DOCUMENT
Document and Paper
Description
2
Action
Copying
CHECKING MEDIA...
3
PLEASE WAIT
Sending and
Description
Receiving 4
Printing and
Action
Scanning
5
COLOR MODE IS SET
CANNOT MULTI DEST TX
Network
6
Description
Remote UI
Action
7
System Manager
Settings
8
DATA ERROR
PRESS START KEY
Maintenance
9
Description
Action
Troubleshooting
10
Appendix
11
Table of Contents
Index
A document jam may have occurred in the ADF.
Remove the jammed document.
Checking the media connected to the USB
memory port.
Wait until the message disappears.
You have specified multiple recipients when
using a color sending.
When using a color sending, you can specify only
one recipient. Send one by one, or use black and
white sending.
The machine may have trouble.
Press [Start] to restore all settings to the default.
If the message persists, contact Canon Customer
Care Center.
Back
DOCUMENT TOO LONG
Description The document fed from the ADF is longer than
24 7/8" (630 mm), or is not feeding correctly.
Action Scan the document on the platen glass.
Action Reduce the length of the document to within 24
7/8" (630 mm), then try again.
FAILED TO WRITE
Description Some kind of error occurred in the machine
when you are scanning a document to a USB
memory (e.g., the USB memory is disconnected
from the machine.).
Action Make sure that the USB memory is inserted
correctly to the machine.
Press [OK] and try again.
TOP
Previous Next
10-15