Canon imageCLASS MF4690 Reference Manual page 65

Before Using the
Machine 1
Scan Settings
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Before pressing [Start] to begin copying, you can adjust the
settings to better suit the document to be scanned. These
settings return to the default values if the Auto Clear function is
activated or if you press [Stop/Reset].
Image Quality
■
1.
Press [COPY].
2.
Press [Image Quality] repeatedly to select the
document type.
<TEXT/PHOTO>: For documents that contain text and photos.
<TEXT/PHOTO+>: For documents that contain fine text and photos.
<TEXT>: For text documents.
<PHOTO>: For documents that contain fine text or photos.
Copy density automatically changes to the manual mode when
<TEXT/PHOTO>, <PHOTO> or <TEXT/PHOTO+> is set.
Back Previous
Density
■
You can adjust the density to the most appropriate level for the
document either automatically or manually.
Adjusting Automatically
1.
Press [COPY].
2.
Press [Density] repeatedly to select <AUTO
DENSITY>, then press [OK].
The image quality is automatically set to <TEXT>.
TOP
Next
3-4