Canon imageCLASS MF4690 Reference Manual page 159

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
3.
Specify the NetBIOS settings
For Windows Vista
●
– Double-click [Internet Protocol Version 4 (TCP/IPv4)] to open the
[Internet Protocol Version 4 (TCP/IPv4) Properties] dialog box →
in the [General] sheet, click [Advanced].
– In the [Advanced TCP/IP Settings] dialog box, click the [WINS] tab
→ in the [WINS] sheet, click [Enable NetBIOS over TCP/IP].
– Click [OK] until all the dialog boxes are closed.
– Restart the computer if prompted.
Back Previous
For Windows 2000/XP/Server 2003
●
– Double-click [Internet Protocol (TCP/IP)] to open the [Internet
Protocol (TCP/IP) Properties] dialog box → in the [General] sheet,
click [Advanced].
– In the [Advanced TCP/IP Settings] dialog box, click the [WINS] tab
→ in the [WINS] sheet, click [Enable NetBIOS over TCP/IP].
– Click [OK] until all the dialog boxes are closed.
– Restart the computer if prompted.
TOP
Next
6-28