Before Using the
Machine
1
TX/RX SETTINGS
Document and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
2. RX SETTINGS
1. TWO-SIDED PRINT
2. RECEIVE REDUCTION
ON
1. RX REDUCTION
2. REDUCE DIRECTION
OFF
3. RX PAGE FOOTER
4. CONT. PRINTING
Sets the reception features.
Sets whether the machine prints received documents on both sides of the paper. (See "Two-
Sided Printing," on p. 4-44.)
–
OFF
–
ON
Sets whether the received images print out at a reduced size. (See "Received Image Reduction,"
on p. 4-44.)
Image reduction is turned on.
Selects the reducing type.
–
AUTO
–
FIXED REDUCTION (90%, 95%, 97%, 75%)
Selects the reducing direction.
–
VERTICAL ONLY
–
HORIZ & VERTICAL
Image reduction is turned off.
Sets whether to insert the machine's fax number and the sender information on received faxes.
–
OFF
–
ON
Selects how the machine responds when the <TONER LOW/PREPARE NEW TONER> message
appears.
Back
Previous
Next
TOP
11-14