Additional Network Settings; Tcp/Ip Settings - Canon imageCLASS MF4690 Reference Manual

Before Using the
Machine 1

Additional Network Settings

Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Depending your network environment, additional network
settings may be required.
It is recommended that the network administrator perform the following
procedures.

TCP/IP Settings

■
DNS Settings
DNS (Domain Name Service) is a service used for associating a host
name (which is a name of a computer or a printer on a TCP/TCP/IP
network) with a unique IP address.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using the numeric
keys, then press [Log In/Out (ID)].
Back Previous
3.
Press [ ] or [ ] to select <NETWORK
SETTINGS>, then press [OK].
4.
Press [ ] or [ ] to select <TCP/IP SETTINGS>,
then press [OK].
5.
Press [ ] or [ ] to select <DNS SETTINGS>,
then press [OK].
6.
Press [ ] or [ ] to select <PRIM. DNS
SERVER>, then press [OK].
7.
Use the numeric keys to enter the IP address of a
primary DNS server, then press [OK].
If you do not need to specify secondary DNS server, skip to step 10.
8.
Press [ ] or [ ] to select <SECOND DNS
SERVER>, then press [OK].
9.
Use the numeric keys to enter the IP address of a
secondary DNS server, then press [OK].
TOP
Next
6-35