Canon imageCLASS MF4690 Reference Manual page 91

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
3.
Press [ ] or [ ] to select <GROUP DIAL>,
then press [OK].
4.
Press [ ] or [ ] to select a group to edit, then
press [OK].
To select a group stored under the coded dial code, press [Coded
Dial], then enter the three-digit code using the numeric keys.
5.
Press [ ] or [ ] to select <SELECT ADD/TEL
NO>, then press [OK].
6.
Select the destination you want to add to the
group, then press [OK].
For details on specifying a destination from Address Book, see
"Registering Group Addresses, " on p. 4-15.
7.
Press [Stop/Reset] to return to the standby
mode.
Deleting Destination from Group
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
Back Previous
3.
Press [ ] or [ ] to select <GROUP DIAL>,
then press [OK].
4.
Press [ ] or [ ] to select a group to edit, then
press [OK].
To select a group stored under the coded dial code, press [Coded
Dial], then enter the three-digit code using the numeric keys.
5.
Press [ ] or [ ] to select <SELECT ADD/TEL
NO>, then press [OK].
6.
Press [ ] or [ ] to display the destination
you want to delete from the group, then press
[Clear].
Repeat this step if you want to delete another destination.
7.
Press [OK].
8.
Press [Stop/Reset] to return to the standby
mode.
TOP
Next
4-17