Telephone Problems - Canon imageCLASS MF4690 Reference Manual

Before Using the
Machine 1

Telephone Problems

Document and Paper
2
Copying
Cannot dial.
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Q Is the telephone cable connected properly?
A Make sure the cable is connected properly. (See "Set
Up the Machine, " in the Starter Guide.)
Q Is the power cord plugged in securely?
A Check that the power cord is securely plugged into
the machine and into the wall outlet. If the machine is
plugged into a power strip, make sure the power strip
is plugged in and turned on.
Q Is the main power switch turned on?
A Turn on the main power switch.
Q Is the machine set for the correct telephone line
type?
A Make sure the machine is set for the correct telephone
line type. (See "Set the Machine for Sending Faxes, " in
the Starter Guide.)
Back
Telephone disconnects while you are talking.
Q Is the telephone cable connected properly?
A Make sure the cable is connected properly. (See "Set
Up the Machine, " in the Starter Guide.)
Q Is the telephone cable defective?
A Use another cord.
Calls do not connect, or the wrong number is dialed.
Q Did you confirm the dial tone before entering the
telephone number?
Make sure to confirm the dial tone before entering a
A
telephone number. If you enter the number before
the dial tone can be heard, the call may not connect,
or the wrong number may be dialed.
TOP
Previous Next
10-51