If <Load Correct Paper> Is Displayed; Re-Loading The Paper; Changing The Paper Size Setting - Canon imageCLASS MF4690 Reference Manual

Before Using the
Machine 1
If <LOAD CORRECT PAPER> is displayed
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
When <LOAD CORRECT PAPER> appears on the LCD display,
the size of the paper in the paper cassette or multipurpose tray
is different from that of the paper specified in <CASSETTE> or
<MP TRAY> of the <PAPER SETTINGS> menu. You need to load
the correct size paper or change the paper size in <CASSETTE>
or <MP TRAY> of the <PAPER SETTINGS> menu.
For print jobs, you need to specify the paper size from your computer.

Re-Loading the Paper

■
1.
Load the correct size paper as shown on LCD
display, then press [OK] to resume the job.
The machine re-starts printing.

Changing the Paper Size Setting

■
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <PAPER SETTINGS>,
then press [OK].
Back Previous
3.
Press [ ] or [ ] to select <CASSETTE> or <MP
TRAY>, then press [OK].
4.
Press [ ] or [ ] to select <PAPER SIZE>, then
press [OK].
5.
Press [ ] or [ ] to select the paper size same
as paper loaded into the machine, then press
[OK].
6.
Press [Stop/Reset] to return to the standby
mode.
For a fax job, go to step 7.
For a copy job, or report print or list print job, go to step 8.
7.
Press [OK] to resume the job.
No further operation is required.
8.
Cancel the job on the system monitor.
For a copy job, you can also cancel the job by pressing [Stop/Reset].
For details on how to cancel the copy job, see "Checking and
Deleting Copy Jobs, " on p. 3-13.
For details on how to cancel the report or list print job, see "Checking
and Deleting Report Jobs, " on p. 11-55.
Now ready to resume the job.
TOP
Next
10-29