Canon imageCLASS MF4690 Reference Manual page 282

Before Using the
Machine 1
#0753
Document and Paper
Description
2
Copying
Action
3
Sending and
Receiving 4 #0755
Description
Printing and
Scanning
5
Action
Network
6
Description
Remote UI
Action
7
System Manager
Description
Settings
8
Maintenance
Action
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
A TCP/IP error occurred while sending an e-mail
message. (Socket, Select error, etc.)
Check the network cables and connectors. If the
machine still does not operate normally, turn the
main power OFF, and then back ON.
You cannot send jobs because TCP/IP is not
functioning correctly.
Check <TCP/IP SETTINGS> in <NETWORK
SETTINGS> in <SYSTEM SETTINGS>.
The IP address is not set.
Check <TCP/IP SETTINGS> in <NETWORK
SETTINGS> in <SYSTEM SETTINGS>.
When the machine was turned ON, an IP address
was not assigned to the machine by the DHCP,
RARP, or BOOTP server.
Check <TCP/IP SETTINGS> in <NETWORK
SETTINGS> in <SYSTEM SETTINGS>. Or wait a
while, and then try sending again.
Back
#0801
Description A timeout error occurred while the machine was
communicating with the SMTP server to send an
e-mail message.
Action Check that the SMTP server is functioning
normally, or check the network status.
Description The SMTP server returned an error while trying to
connect. The destination is not correct. An error
occurred on the server side during transmission
to a file server.
Action Check that the SMTP server is functioning
normally. Check the network status. Check the
destination setting. Check the status and setting
of the file server.
TOP
Previous Next
10-25