Canon imageCLASS MF4690 Reference Manual page 230

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
3.
Press [ ] or [ ] to select <ACCESS TO DEST.>,
then press [OK].
4.
Press [ ] or [ ] to select <REST. REDIAL/
CALL>, then press [OK].
5.
Press [ ] or [ ] to select <ON> or <OFF>,
then press [OK].
6.
Press [Stop/Reset] to return to the standby
mode.
Restricting Broadcasting
■
You can specify whether or not to allow sending the documents to
multiple recipients.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using the numeric
keys, then press [Log In/Out (ID)].
Back Previous
3.
Press [ ] or [ ] to select <ACCESS TO DEST.>,
then press [OK].
4.
Press [ ] or [ ] to select <REST. MULTI
DEST>, then press [OK].
5.
Press [ ] or [ ] to select <OFF>, <PROHIBIT>
or <CONFIRMATION>, then press [OK].
<OFF>: Allows sending the documents to multiple recipients.
<CONFIRMATION>: The message appears after pressing [Start] to
confirm whether or not to send documents to multiple recipients.
The message only appears when fax numbers are included in the
recipients.
<PROHIBIT>: Does not allow sending the documents to multiple
recipients.
6.
Press [Stop/Reset] to return to the standby
mode
TOP
Next
8-20