Canon imageCLASS MF4690 Reference Manual page 60

Before Using the
Machine 1
Setting Paper Size and Type
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
The default setting is <LTR> and <PLAIN PAPER>. When you
place other sizes and/or types of paper, follow this procedure to
change the settings.
The procedure is same for the paper cassette and multi-
purpose tray except for selecting the paper cassette or multi-
purpose tray in step 3 and 6.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <PAPER SETTINGS>,
then press [OK].
3.
Press [ ] or [ ] to select <CASSETTE> or <MP
TRAY>, then press [OK].
4.
Press [ ] or [ ] to select <PAPER SIZE>, then
press [OK].
Back Previous
5.
Press [ ] or [ ] to select the paper size, then
press [OK].
You can select from the following paper sizes:
<LTR>, <LGL>, <A4>, <B5>, <A5>, <EXECUTIV>, <COM10>,
<MONARCH>, <DL>, <ISO-C5>, <OFICIO>, <BRAZIL-OFICIO>,
<MEXICO-OFICIO>, <FOLIO>, <G-LTR>, <G-LGL>, <FLSP>
The paper sizes available will vary depending on the country where
the unit was purchased.
6.
Press [ ] or [ ] to select < SELECT PAPER
TYPE>, then press [OK].
If you have selected <B5>, <A5>, <EXECUTIV>, <COM10>,
<MONARCH>, <DL> or <ISO-C5> for the paper size in step 5,
<SELECT PAPER TYPE> is not displayed. Skip to step 8.
TOP
Next
2-13